FORK COVER KITS
Cult Werk Fork Cover Kits
CW-HD-BRO028
6 Piece Fork Cover Kit With Logo
Suits 18-UP FXBR Models
Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with bellows suitable for Harley-Davidson ® Breakout models from year of construction 2018. With this kit from Cult-Werk you can blend the fork tubes above, between and below the fork bridges. So the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders.
The individual covers are fastened with concealed set screws and thus center themselves on the fork tubes. This ensures a secure hold of the cover. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same slants as the fork bridges.
Our covers are made of high-quality aluminum and are milled on the latest 5-axis machining centers and then powder-coated in black gloss. This guarantees absolutely the highest quality! The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cut-out for freedom of movement on the fender and is therefore hardly visible.
– Kit made of pure aluminum (2x fork caps milled with the CWC logo, 2x upper fork cover & 2x lower fork cover)
CW-HD-BRO044
6 Piece Fork Cover Kit (Black)
Suits 18-UP FXBR Models
Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with bellows suitable for Harley-Davidson ® Breakout models from year of construction 2018. With this kit from Cult-Werk you can blend the fork tubes above, between and below the fork bridges. So the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders.
The individual covers are fastened with concealed set screws and thus center themselves on the fork tubes. This ensures a secure hold of the cover. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same slants as the fork bridges.
Our covers are made of high-quality aluminum and are milled on the latest 5-axis machining centers and then powder-coated in black gloss. This guarantees absolutely the highest quality! The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cut-out for freedom of movement on the fender and is therefore hardly visible.
– Kit made of pure aluminum (2x fork caps, 2x upper fork cover & 2x lower fork cover)
CW-HD-BRO011
6 Piece Fork Cover Kit (Black)
Suits 13-17 FXSB Models
Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with bellows suitable for Harley-Davidson ® Breakout models from year of construction 2013 to 2017. With this kit from Cult-Werk you can blend the fork tubes above, between and below the Triple trees. So the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders.
The individual covers are fastened with concealed set screws and thus center themselves on the fork tubes. This ensures a secure hold of the cover. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same slants as the fork bridges.
Our covers are made of high-quality aluminum and are milled on the latest 5-axis machining centers and then powder-coated in black gloss. This guarantees absolutely the highest quality! The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cut-out for freedom of movement on the fender and is therefore hardly visible.
– Kit made of pure aluminum (2x fork caps, 2x upper fork cover & 2x lower fork cover)
CW-HD-DYN018
6 Piece Fork Cover Kit (Black)
Suits 07-17 Dyna Models
Complete 6-piece fork cover kit in black with the lower covers made of aluminum or with bellows suitable for Harley-Davidson ® Dyna models with 49mm fork from year of construction 2007 to current!
With this kit from Cult-Werk you can blend the fork tubes above, between and below the fork bridges. So the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using grub screws and thus center themselves on the fork tubes. This ensures a secure hold!
Our covers are made of high-quality aluminum and are milled on the latest 5-axis machining centers and then powder-coated in black gloss. This guarantees absolutely the highest quality! The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cut-out for freedom of movement on the fender and is therefore hardly visible.
– Kit made of pure aluminum (2x fork caps, 2x upper fork cover & 2x lower fork cover)
CW-HD-ROD026
6 Piece Fork Cover Kit (Black)
02-06 VROD Night Rod Special Models
Complete fork cover kit 6 pieces in black suitable for all Harley Davidson V-Rod models also with standard front fenders. With this 6-piece fork cover kit from Cult-Werk you can cover the fork tubes above, between and below the fork bridges. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! This 6-piece fork cover kit can be used with the original front fender or custom fender.
The individual covers are attached using concealed set screws and thus center themselves on the fork tubes. This ensures that the cover is held securely. So that the gaps between the covers and the triple clamps are exactly parallel, the covers have the same bevels as the triple clamps.
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality! The assembly is very easy, the upper and the lower cover are only pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for freedom of movement on the fender and is therefore hardly visible.
All parts required for assembly are included in the kit! This 6-piece fork cover kit can be used with the original front fender or custom fender.
CW-HD-ROD028-S
6 Piece Fork Cover Kit (Black)
07-11 VROD Night Rod Special Models
Complete fork cover kit 6 pieces in black suitable for all Harley Davidson V-Rod models also with standard front fenders. With this 6-piece fork cover kit from Cult-Werk you can cover the fork tubes above, between and below the fork bridges. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! This 6-piece fork cover kit can be used with the original front fender or custom fender.
The individual covers are attached using concealed set screws and thus center themselves on the fork tubes. This ensures that the cover is held securely. So that the gaps between the covers and the triple clamps are exactly parallel, the covers have the same bevels as the triple clamps.
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality! The assembly is very easy, the upper and the lower cover are only pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for freedom of movement on the fender and is therefore hardly visible.
All parts required for assembly are included in the kit! This 6-piece fork cover kit can be used with the original front fender or custom fender.
CW-HD-BRO103
6 Piece Fork Cover Kit (Black)
18-UP M8 FXBB and Softail Standard Models
Complete 6-piece fork cover kit in black with the fork caps in pure black or with milling suitable for Harley-Davidson ® Street Bob models from year of construction 2018! With this kit from Cult-Werk you can blend the fork tubes above, between and below the fork bridges. So the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using grub screws and thus center themselves on the fork tubes. This ensures a secure hold!
Our covers are made of high-quality aluminum and are milled on the latest 5-axis machining centers and then powder-coated in black gloss. This guarantees absolutely the highest quality! The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cut-out for freedom of movement on the fender and is therefore hardly visible.
– without milling (the caps are supplied in pure black)
CW-HD-BRO031
2 Piece Lower Fork Cover Kit (Black)
18-UP M8 FXBR Models
Suitable for all Harley-Davidson ® Breakout models from year of construction 2018. With this 2-piece fork cover kit from Cult-Werk you can hide the lower fork tubes below the fork bridge. This way, the chrome-plated fork tubes are covered and the entire fork appears beefier and completely black! The covers are attached using hidden setscrews and thus center themselves on the fork tubes. This ensures a secure hold of the cover. To ensure that the gaps between the covers and the fork bridge are exactly parallel, the covers were provided with the same slants as the fork bridge.
Our covers are made of high-quality aluminum and are milled on the latest 5-axis machining centers and then powder-coated in black gloss. This guarantees absolutely the highest quality! Installation is very simple, the cover is only pushed over the fork tube and screwed tight. This Gable Cover Kit is suitable for the original front fender and for custom fenders.
All parts required for assembly are included!
CW-HD-BRO026
2 Piece Lower Fork Cover Kit (Black)
13-17 FXSB Models
With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes below the fork bridge. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black!
The covers are attached using concealed set screws and thus center themselves on the fork tubes. This ensures that the cover is held securely. So that the gaps between the covers and the fork bridge are exactly parallel, the covers have the same bevels as the fork bridge.
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality! The assembly is very easy, the cover is only pushed over the fork tube and screwed tight. This fork cover kit is suitable for the original front fender and for custom fenders.
All parts required for assembly are included!
CW-HD-UNI043
2 Piece Lower Fork Cover Kit (Black)
18-UP FXBB and 07-17 Dyna models
Suitable for all Harley-Davidson ® Dyna models with 49 mm fork up to the year of construction 2017 and for Harley-Davidson ® Street Bob from the year of construction 2018! With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes below the fork bridge. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are attached using concealed set screws and thus center themselves on the fork tubes. This ensures that the cover is held securely.
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality! The assembly is very easy, the cover is only pushed over the fork tube and screwed tight. This Gable Cover Kit is suitable for the original front fender and for custom fenders.
CW-HD-BRO055
2 Piece Lower Fork Cover Kit (Black)
FXLRS,FXLRST,FXFB,FXDR, Models
Suitable for all Harley-Davidson ® FXDR models from the year of construction 2019. You can cover the lower fork tubes with this 2-piece fork cover kit from Cult-Werk. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are screwed together with the brake calipers. This ensures that the cover is held securely.
Our covers are made of high quality steel and are milled on the most modern 5-axis machining centers and then powder-coated in black matt. This guarantees absolutely the highest quality! The assembly is very easy, the cover is only pushed over the fork tube and screwed tight. The kit is suitable for the original front fender as well as for our custom fenders.
All parts required for assembly are included!
CW-HD-ROD021
2 Piece Lower Fork Cover Kit (Black)
12-17 VROD Models
Suitable for all Harley Davidson V-Rod, Night Rod Special and Muscle models.
With this 2-piece fork cover kit from Cult-Werk you can cover the chrome-plated fork tubes below the fork bridge. So the chrome fork tubes are covered and the entire fork appears beefier and completely black.
The covers are screwed onto the front fender and the brake caliper. This ensures that the cover is held securely. Of course, the series fender can still be used. Made of high quality aluminum. Milled on the most modern 5-axis machining centers. Glossy black powder-coated!
CW-HD-BRO105
4 Piece Upper Fork Cover Kit (Black)
18-UP FXBB and Softail Standard Models
Complete 4-piece fork cover kit in black with fork caps in pure black or with milling suitable for Harley-Davidson ® Street Bob models from the year of construction 2018! With this kit from Cult-Werk you can cover the fork tubes above and between the fork bridges. So the fork tubes are covered and the entire fork appears beefy and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached by means of threaded pins and thus center themselves on the fork tubes. This ensures a secure hold!
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality! The assembly is very easy, the upper and the lower cover are only pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for freedom of movement on the fender and is therefore hardly visible.
CW-HD-BRO030
2 Piece Upper Fork Cover Kit (Black)
18-UP FXBR Models
Suitable for all Harley-Davidson ® Breakout models from year of construction 2018! With this 2-piece fork cover kit from Cult-Werk you can cover the upper fork tubes between the fork bridges. So the fork tubes are covered and the entire fork appears beefier and completely black. The covers are attached using concealed set screws and thus center themselves on the fork tubes. This ensures that the cover is held securely. So that the gaps between the covers and the triple clamps are exactly parallel, the covers have the same bevels as the triple clamps.
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality! The assembly is very easy, the cover is only pushed over the fork tube and screwed tight.
All parts required for assembly are included in the kit!
CW-HD-BRO015
2 Piece Upper Fork Cover Kit (Black)
Suits 13-17 FXSB Models
With this 2-piece fork cover kit from Cult-Werk you can cover the upper fork tubes between the fork bridges. This covers the fork tubes and the entire fork appears beefier and completely black.
The covers are attached using concealed set screws and thus center themselves on the fork tubes. This ensures that the cover is held securely. So that the gaps between the covers and the triple clamps are exactly parallel, the covers have the same bevels as the triple clamps.
Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality! The assembly is very easy, the cover is only pushed over the fork tube and screwed tight.
All parts required for assembly are included in the kit!
CW-HD-BRO113
2 Piece Upper Fork Cover Kit (Black)
18-UP FXBB and Softail Standard Models
The fork cover from Cult-Werk ® covers the upper fork tubes between the two triple trees and fits all Harley-Davidson ® Street Bob and Softail standard models from the year of construction 2018. The entire fork appears beefier and all chrome is also covered. The covers are made of high-quality aluminum that is machined and milled on the most modern 5-axis machining centers!
CW-HD-DYN004
2 Piece Upper Fork Cover Kit (Black)
07-17 DYNA Models
This 2-piece fork cover kit from Cult-Werk covers the upper chrome-plated fork tubes and fits all Harley-Davidson ® Dyna models from 2007 to 2017. The entire fork appears beefy and completely black! Milled from high quality aluminum on the most modern 5-axis machining centers.
KODLIN FRONT END COVER KIT
K46660
Kodlin Front End Cover
FXBR/S 18-UP Models
Adds a high-end touch to the M8 Softail Breakout front end.
Made from 6061 aluminum with a bolt black finish
This kit comes with all necessary hardware for an easy installation. The black top covers with 6 stainless steel Allen head screws complete that high performance look (a set of black and a set of black contrast cut screws are included).
THUNDERBIKE UPPER FORK COVERS
TB-61-72-170
Upper Fork Covers
FXSB 13-17 Models
Sold in pairs
Black
TB-61-74-110
Upper Fork Covers
FXBB 18-UP Models
Sold in pairs
Black
TOP FORK BOLT COVERS
CW-HD-BRO101
Fork Cap Covers (Black)
18-UP FXBB/FLFB Models
The Cult-Werk fork caps fit Harley-Davidson ® Street Bob and Fat Boy models from the year of construction 2018! They cover the fork tubes above the fork bridge and are securely fastened with a concealed set screw. Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black gloss. This guarantees absolutely the highest quality!
CW-HD-UNI036
Fork Cap Covers (Black)
13-17 FXSB 07-17 Dyna 02-11 vrod Models
The Cult-Werk fork caps cover the ends of the fork tubes above the fork bridge and are securely fastened with a concealed set screw. These caps fit Harley-Davidson ® V-Rod / Night Rod models from 2002 to 2011, Breakout models from 2013 to 2017 and Dyna models from 2007 to 2017! Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality!
CW-HD-BRO032
Fork Cap Covers with logo (Black)
18-UP FXBR Models
The Cult-Werk fork caps fit all Harley-Davidson ® Breakout models from the year of construction 2018! They cover the fork tubes above the fork bridge and are securely fastened with a concealed set screw. Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality!
CW-HD-BRO043
Fork Cap Covers without logo (Black)
18-UP FXBR Models
The Cult-Werk fork caps fit all Harley-Davidson ® Breakout models from the year of construction 2018! They cover the fork tubes above the fork bridge and are securely fastened with a concealed set screw. Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in black. This guarantees absolutely the highest quality!
TB-61-74-120
TOP FORK BOLT COVERS
Suits 18-Up FXBR Models
• Black powder coated top fork caps
• Covers are clamped by a grub screw
• Sold in Pairs
KPR-FCC-03
TOP FORK BOLT COVERS
Suits 21-Up Sportster S Models
• Mounting on the fork nuts
• High-strength CNC-milled aluminum housing
• Blinding of the upper fork screw
• Covers are clamped with a threaded pin
SWINGARM PIVOT BOLT COVERS
KPR-SAC-01
SWINGARM PIVOT BOLT COVERS
Suits 08-17 FXST Models
• Gloss black swingarm pivot axle covers made of CNC machined high-strength aluminum
• Both covers are clamped with a VA grub screw for a nice clean look
• Sold in Pairs
KPR-SAC-02
SWINGARM PIVOT BOLT COVERS
Suits 18-UP M8 Softail Models
• Gloss black swingarm pivot axle covers made of CNC machined high-strength aluminum
• The cover is clamped with a VA grub screw for a nice clean look
• Sold Each
TB-22-74-130
LEFT SWINGARM PIVOT BOLT COVER BLACK
Suits 18-UP M8 Softail Models
• Gloss black swingarm pivot axle covers made of CNC machined high-strength aluminum
• Sold Each
TB-22-74-140
LEFT SWINGARM PIVOT BOLT COVER POLISHED
Suits 18-UP M8 Softail Models
• Polished swingarm pivot axle covers made of CNC machined high-strength aluminum
• Sold Each
KPR-SAC-03
SWINGARM PIVOT BOLT COVER BLACK
Suits 21-UP Sportster S Models
• Mounting on the swingarm
• High-strength CNC-milled aluminum housing
• Blinding of the Schwing axle nut
• Covers are clamped with a threaded pin
PULLEY COVERS
TB-22-85-020
FRONT PULLEY COVER
Fits Nightster & Sportster S ’21-later Models
This cover for the front belt pulley provides a classy contrast cut look. The short timing belt guard is included in the kit.
• Finish: black contrast cut
• Machined aluminium
• Cover rotates with pulley
DERBY COVERS
TB-22-85-060
DERBY COVER
Fits Nightster & Sportster S ’21-later Models
Machined original Thunderbike clutch cover (Derby Cover).
• CNC machined aluminum
• Black anodized
• In Thunderbike SP-S design
IGNITION COVERS
TB-22-85-070
IGNITION COVER
Fits Nightster & Sportster S ’21-later Models
Thunderbike SP-S design ignition cover for Revolution Max models ’21 and up
• Machined Aluminum
• Black anodized
ALTERNATOR COVERS
TB-22-85-090
ALTERNATOR COVER
Fits Nightster & Sportster S ’21-later Models
• Milled original Thunderbike alternator cover in SP-S design
• CNC milled aluminum
• Black anodized
• In Thunderbike SP-S design
AXLE COVERS
TB-22-74-170
FRONT AXLE COVERS BLACK
Suits Softail 18-later (excl. Upside-Down Fork)
• Gloss black CNC machined Aluminium Axle Cover-Set
• Sold in Pairs
• Fits Harley-Davidson Softail 18-later models (except models with upside-down / inverted fork like FXDR, FXLRS, Fat Bob and Sport Glide models).
TB-22-74-280
FRONT AXLE COVERS BLACK
Suits 18-UP FLSB Models
• Gloss black CNC machined Aluminium Axle Cover-Set
• Sold in Pairs
• Fits Harley-Davidson FLSB 18-later models
TB-22-74-300
FRONT AXLE COVERS BLACK
Suits 18-UP FXLRS Models
• Matt Black CNC machined Aluminium Axle Cover-Set
• Sold in Pairs
• Fits Harley-Davidson FXLRS 18-later models
KPR-FAC-03
FRONT AXLE COVERS BLACK
Suits 21-UP SportsterS Models
• Mounting on the front thru axle
• High-strength CNC-milled aluminum housing
• Blinding of the quick-release axle / wheel nut
• Covers are clamped by a threaded rod
TB-22-74-090
REAR AXLE COVERS BLACK
Suits 18-UP M8 Softail Models
• Gloss black CNC machined Aluminium rear axle bolt cover
• Sold in Pairs
KPR-RAC-04
REAR AXLE COVERS BLACK
Suits 21-UP Sportster S Models
• Mounting on the rear thru axle
• High-strength CNC-milled aluminum housing
• Blinding of the quick-release axle / wheel nut
• Covers are clamped with a threaded pin
FRAME COVERS
TB-22-85-040
Fits Nightster & Sportster S ’21-later Models
With this Thunderbike frame cover it is possible to hide the brake line, the hoses of the cooling and the activated carbon filter.
OIL COOLER COVERS
KPR-OCC-107
Suits 18-UP M8 Softails
Black powder coated 107 oil cooler/radiator cover
Easy to mounting for an exact fit
KPR-OCC-117
Suits 18-UP M8 Softails
Black powder coated 117 oil cooler/radiator cover
Easy to mounting for an exact fit
KPR-OCC-PLAIN
Suits 18-UP M8 Softails
Black powder coated slotted oil cooler/radiator cover
Easy to mounting for an exact fit
KPR-OCC-SS
Suits 21-UP Sportster S Models
Mounting on the cooler
Attachment to the original points
No conversions or drilling necessary
Easy installation / exact fit
Black powder coated steel
Prevents major damage to the cooling fins
WK-106623-F28
Suits 18-UP M8 Softails
Protection grid for oil cooler
• For mounting in front of the original oil cooler of Harley Softail models from 2018.
• Protects the oil cooler against damages by big stones and upgrades the optics.
• The metal cover is simply fixed between the original frame and the cooler by 2 screws.
• Rubber straps hinder rubbing and clacking at the metal sheet.
• The metal cover is semi-matt black plastic-coated.
EFI COVER
TB-96-77-170
EFI Cover
Fits Harley-Davidson Touring 17-later and Softail 18-later models.
EFI Cover in a black wrinkle finish
HEX HEAD BOLT/NUT COVERS
2402-0159
INDIVIDUAL BOLT COVERS (BLACK PK10)
7/16″ Hex Bolt/Nut (5/8″ Wrench Size)
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Easy to install with included detailed installation instructions
• Made from ABS material, fasten with silicone; sold separately
• Sold in 10 packs
2402-0120
INDIVIDUAL BOLT COVERS (CHROME PK10)
7/16″ Hex Bolt/Nut (5/8″ Wrench Size)
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Easy to install with included detailed installation instructions
• Made from ABS material, fasten with silicone; sold separately
• Sold in 10 packs
2402-0156
INDIVIDUAL BOLT COVERS (BLACK PK10)
5/16″ Hex Bolt/Nut (1/2″ Wrench Size)
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Easy to install with included detailed installation instructions
• Made from ABS material, fasten with silicone; sold separately
• Sold in 10 packs
2402-0157
INDIVIDUAL BOLT COVERS (BLACK PK10)
1/2″ Hex Bolt/Nut (3/4″ Wrench Size)
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Easy to install with included detailed installation instructions
• Made from ABS material, fasten with silicone; sold separately
• Sold in 10 packs
KPR-BCC-9-BLK
INDIVIDUAL BOLT COVERS
(BLACK WITH STRIPES PK10)
3/8″ Hex Bolt/Nut (Inner size 9mm)
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Made from alloy
• An internal spring steel retention clip holds the covers securely in place.
• Sold in 10 packs
KPR-BCC-11-BLK
INDIVIDUAL BOLT COVERS
(BLACK WITH STRIPES PK10)
7/16″ Hex Bolt/Nut (Inner size 11.5mm)
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Made from alloy
• An internal spring steel retention clip holds the covers securely in place.
• Sold in 10 packs
KPR-BCC-13-BLK
INDIVIDUAL BOLT COVERS
(BLACK WITH STRIPES PK10)
1/2″ Hex Bolt/Nut (Inner size 13mm)
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Made from alloy
• An internal spring steel retention clip holds the covers securely in place.
• Sold in 10 packs
HEAD BLOT COVERS
KPR-HBC-BK
Head Bolt Cover
(BLACK WITH STRIPES)
Suits 00-17 HD Models
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Made from alloy
• An internal spring steel retention clip holds the covers securely in place.
• Sold in packs of 4
FRONT ENGINE MOUNT BOLT COVERS
KPR-EBC-01
Front Engine Mount Bolt Cover
Suits 13-17 FXST/FXSB Models
• Gloss black front engine mount bolt covers made of CNC machined high-strength aluminum
• Both covers are clamped with a VA grub screw for a nice clean look
• Sold in Pairs
LIFTER BLOCK BOLT COVERS
KPR-LBC-BLK
LIFTER BLOCK BOLT COVER KIT
(BLACK WITH STRIPES)
Suits 06-17 and M8 Softail Models
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Made from alloy
• An internal spring steel retention clip holds the covers securely in place.
ROCKER BOX BOLT COVERS
KPR-RBC-TC-BLK
ROCKERBOX BOLT COVER KIT
(BLACK WITH STRIPES)
Suits 06-17 HD Models
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Made from alloy
• An internal spring steel retention clip holds the covers securely in place.
HEADLIGHT BOLT COVERS
KPR-HLBC-BK
HEADLIGHT BOLT COVER KIT
(BLACK WITH STRIPES PK3)
Suits 1/2″Bolt/Nuts
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Made from alloy
• An internal spring steel retention clip holds the covers securely in place.
• Sold in packs of 3
RISER BOLT COVERS
IOMP-10394
RISER BOLT COVERS
Suits Pre 2017 HD Models
• Black powder coated riser bolt covers
• Covers are clamped by a grub screw
HANDLEBAR CLAMP BOLT COVERS
KPR-FLFB-HBBC-BLK
HANDLEBAR CLAMP BOLT COVERS
(BLACK WITH STRIPES PK4)
Suits 17-UP FLFB Models
• Beautifully designed pieces to cover the raw OEM bolt heads or nuts
• Made from alloy
• An internal spring steel retention clip holds the covers securely in place.
• Sold in packs of 4
SHOCK BOLT COVERS
KPR-SBC-M8
SHOCK BOLT COVERS
Suits 18-UP M8 Models
• Gloss black shock bolt covers made of CNC machined high-strength aluminum
• Both covers are clamped with a VA grub screw for a nice clean look
• Sold Each
CALIPER INSERTS
IOMP-10341-2
Brake Caliper Insert White Stripe
This Black caliper cover with white stripe is made of sturdy vinyl and is self-adhesive
Sold in Pairs
IOMP-10341-3
Brake Caliper Insert Red Stripe
This Black caliper cover with red stripe is made of sturdy vinyl and is self-adhesive
Sold in Pairs
